Russian Style Nubian Meditation Pyramid PVC Connector Kit For 3/4" USA PVC Pipe

Description

This is a 5 Piece set of PVC connectors for making your own Russian type or Nubian pyramid where the slope angle is much steeper than the Giza pyramid. These are handmade made from USA parts and are very strong. They are not perfect looking but they do the job for a lot less than what some other people are charging for similar connectors and they'll
match
the same material as the PVC pipes. Your satisfaction is guaranteed.
David Wilcock talks about the Russian pyramids in his research are made from fiberglass and PVC pipes no metal.
https://www.youtube.com/watch?v=EQ9160Ty9m8
Author/Scientist Dr. Patrick Flanagan of "Pyramid Power" talks about some of the effects of the Nubian pyramid.
https://www.youtube.com/watch?v=km65_ejiUR8
The origin of the word Pyramid is derived from the Greek word Pyramidos translated as "Fire in the Middle".
Save money by buying your own 3/4" inch Schedule 40 PVC Pipe from your local Home Improvement Hardware Store. They are actually 1" Inch Outside diameter and are more sturdier than the smaller smaller size. Some samples will be provided. They might even cut it for you if you ask them nicely.
Instructions:
Depending on the size of the Nubian pyramid you want to make. The lateral edge that goes from the base to the top is the Base length X 1.618. ( for example if the base is 50" Inches you would times 50" X 1.618 = 80.9" Inches roughly 81" inches) So you would need
4 pieces 50" Inches long
and
4 pieces 81" Inches long
. This is the golden ratio. ( Note that PVC is semi-flexible and you have a few inches leeway that you can add to the lateral edge/sides if you want a more steeper slope like the Russian pyramid)
For best results have one side of the pyramid facing magnetic North.
Basic instructions will be provided with your kit.
You have to de-ink the lettering on the pipe or not if it doesn't bother you. Lots of videos on YouTube ( I recommend sanding first with 100 grit sandpaper and using acetone or nail polish remover that contains acetone to clean it up). New pipes are laser etched and can only be sanded off.
Thank you for your interest.
Wishing you all the best.