Wattstopper PW311b PIR Dimmable Wall Switch Occupancy Sensor 120/277 black

Description

Overview
Wattstopper PIR dimmable wall switch occupancy sensor senses within a distance of 525-Sq-ft. It has a voltage rating of 120/277-Volts AC at 50/60-Hz. It has color matched vandal-resistant lens. The sensor has a maximum load capacity of ballast/LED/tungsten - 0 to 1000-Watts, 1/6 hp motor at 120-Volts AC, ballast/LED - 0 to 1200-Watts, 1/6 hp motor at 277-Volts AC. It offers 0 to 10-Volt DC dimming output. Wall mountable sensor in light almond color, has a minimum response time for the sensor is 3 to 30 min. Sensor supports auto-ON to 50% switch. It has selectable walk-through mode to turn lights OFF 3 min after the room is initially occupied and if no motion is detected after the first 30 sec. Sensor features selectable audible alert for impending shut-OFF. It defaults to manual-ON operation for maximum energy savings. Sensor features neutral sense connection with break OFF tab to expose neutral terminals. During presentation mode sensor may be deactivated to allow auto-ON operation after 15-sec time delay. Sensor features service mode to ensure sensor to operate as a service switch in the unlikely event of a failure. It has test mode for quick and easy verification of coverage. It measures 2.73-Inch x 1.75-Inch x 1.81-Inch. Sensor is suitable for small office, small conference room, lunch/break rooms. Sensor meets UL/cUL, RoHS standards.
black in color